AuctivaInternalLink

Product Videos

GUILLOTINE™ Electric Paper Cutters

EC19 PRO V2 Owners Manual PDF Format

EC19 PRO / EC19M Owners Manual PDF Format
EC17 / EC19 Owners Manual PDF Format

EC19 PRO V2 Stand Assembly

EC19 PRO V2 Basic Operation

EC19 PRO V2 Tutorial Video

EC19 PRO V2 Blade and Cut Pad Replace

EC19 PRO V2 Cutter is Blowing Fuses

EC19 PRO V2 Fuse Replace (cutter has no power)

EC19 PRO V2 Blade Stuck / Reverse Blade

EC19 PRO V2 Main Computer Board (mother board) Replacement

EC19 PRO V2 Main Computer Board (mother board) Replacement Tip on Spacers and Screws

EC19 PRO V2 Display Screen Replacement

EC19 PRO V2 Data Wire Replacement

EC19 PRO V2 Paper Push Angle Adjustment

EC19 PRO V2 Paper Push Length Adjustment

EC19 PRO V2 Loose Side Infrared Grid Repair

EC19 PRO V2 Back Table Removal (tan color)

EC19 PRO V2 Back Table Removal (black color)

EC19 PRO V2 Electrical Plug Replace

EC19 PRO V2 Cut Button Replace

EC19 PRO V2 Blade Position Sensor Adjustment

EC19 PRO Electric Paper Cutter Demo

EC19 PRO / EC19M Replace LED Display Screen / Install EC19M Upgrade to EC19 PRO Kit

EC19 PRO / EC19M Bypass On/Off Switch or Emergency Stop Button

EC19 PRO / EC19M Front Table to Electronics Compartment Removal

EC19 PRO / EC19M Blade & Cut Pad Change

EC19 PRO / EC19M Blade Height Adjustment

EC19 PRO / EC19M Clamp Height Adjustment

EC19 PRO / EC19M Touch Pad Change

EC19 PRO / EC19M Replace On/Off Switch

EC19 PRO / EC19M Replace Emergency Stop Button

EC19 PRO / EC19M Replace Blade Holder

EC19 PRO / EC19M Replace Broken Pin in Blade Holder

EC19 PRO / EC19M Laser Cut Line Adjustment

EC19 PRO / EC19M Stiff Clamp Fix

EC19 PRO / EC19M Fixing Rattles During Cutting Motion

EC19 PRO / EC19M Loose Pully on Paper Push Motor

EC19 PRO / EC19M - Paper Push will not Move

EC19 PRO / EC19M Replace Clamp Motor

EC19 PRO / EC19M Replace Main Motor

EC19 PRO / EC19M Replace Main Computer Board

EC19 PRO / EC19M Replace Paper Clamp Assembly

EC19 PRO / EC19M Wiring* (for cutters that have main board version V1.6)

Troubleshooting EC19 PRO / EC19M Blade will not come down

EC19 PRO / EC19M Replace Blade Attachment Key Part

- If bolt breaks not key part and key is hard to remove watch this also

EC17/EC19 Electric Paper Cutter Demo
EC17/EC19 Blade Change & Maintenance
EC17/EC19 Detailed Blade & Cut Pad Change
EC17/EC19 Blade Height Adjustment
EC17/EC19 Paper Push Motor Replace

Troubleshooting EC17/EC19 Blade will not come down

All Electric Cutters Stand Assembly

All Electric Cutters Emergency Stop Button Replace

All Electric Cutters Cut Button Replace

All Electric Cutters - Tighten Cut Buttons, Emergency Stop or ON/OFF Switch

All Electric Cutters Back Paper Push Length Adjustment

All Electric Cutters Back Paper Push Angle Adjustment

All Electric Cutters Binding Paper Push Adjustment

PERFECT™ Manual Paper Cutters

G12 Pro/G17 Pro/G17Elite Owners Manual PDF format

G12 PRO, G17 PRO & G17 PRO Elite Demo

G12 PRO & G17 PRO Install Safety Cover to Replace Cut Pad

G12 PRO & G17 PRO Blade Change

G12 PRO & G17 PRO Detailed Blade Height Angle Adjustment

G12 PRO & G17 PRO Detailed Blade Left to Right Angle Adjustment

G12 PRO & G17 PRO Clamp Angle Adjustment
G17 PRO Elite Setup & Stand Assembly

STACK™ Manual Paper Cutter

S12 Paper Cutter Owners Manual PDF Format

S12 Paper Cutter Demo
S12 Paper Cutter Blade Change

New Stack S12 Paper Cutter Blade & Cut Pad Change (2017 to present)

PERFECT Creaser & Perforator

MC6 Creaser & MP6 Perforator Demo

PERFECT Paper Trimmers

RT25 & RT40 Rotary Trimmer Demo

RT25 & RT40 Rotary Trimmer Blade Change

*On the EC19 Pro/EC19M wiring video above, the first motor wire (starting on the left and mentioned at the 5:33 minute mark of the video) is the Yellow wire on the left hand side of the main board. Second wire is the Orange wire, third wire is the Green wire and fourth wire is the Purple wire. All four colored wires referred to here are the ones mentioned and seen on the left hand side of the main board. This is for cutters that have main board version V1.6.